LAFVIN Super Starter Kit for UNO R3
£58.99 inc. VAT (£49.16 ex. VAT)
- Blue UNO R3 board with a CH340 USB chip. In the Arduino IDE, select Arduino UNO.
- USB cable in the kit powers the board from a computer.
- 830-point breadboard with 65 jumper wires. Breadboard parts push in.
- LCD1602, SG90 servo, stepper motor and ULN2003 driver board are in the kit.
Why Choose UnoProject
The Smarter Way to Learn Electronics
The LAFVIN Super Starter Kit for UNO R3 is a blue UNO R3 board with a CH340 USB chip, plus the breadboard parts for first circuits. In the Arduino IDE, select Arduino UNO.
From First Circuit to Advanced Prototypes
The kit includes an 830-point breadboard, an LCD1602 with a pin header, 1-digit and 4-digit 7-segment displays, an SG90 servo, a 3V servo with soldered leads, a stepper motor and ULN2003 driver board, a DHT11 module and an ultrasonic sensor.
Unmatched Value and Compatibility
A USB cable powers the board from a computer. A 9V battery connector is in the kit. No 9V battery is supplied. Breadboard parts push in with the jumper wires.
Technical Specifications
- Microcontroller
- ATmega328P (UNO R3 Compatible)
- Operating Voltage
- 5V
- Input Voltage (Recommended)
- 7-12V
- Digital I/O Pins
- 14 (6 provide PWM output)
- Analog Input Pins
- 6
- Breadboard
- 830 points
- USB chip
- CH340
- Warranty
- 12 months UK
Price Comparison
See how our price compares across UK retailers
| Retailer | Price | Delivery | Warranty |
|---|---|---|---|
| UnoProject UKBEST | £58.99 | FREE | 12 months |
| Amazon UK | £58.99 | £4.99 | 12 months |
| eBay (est.) | £69.61 | Varies | Seller dependent |
| High Street RRP | £75.51 | N/A | Varies |
Prices checked 16 July 2026. Prices may vary.
Customer Reviews
Bought this for my son, who is learning to code. He had the ultrasonic sensor measuring distance the same afternoon. The USB cable and the 830-point breadboard were in the box.
The UNO R3 board connected with the USB cable and showed up once I selected Arduino UNO in the Arduino IDE. The breadboard and jumper wires are in the kit.
The stepper motor and ULN2003 driver board are in the kit, and the LCD1602 is useful on the bench. I select Arduino UNO in the Arduino IDE.
The DHT11, the sound module and the ultrasonic sensor are all in the kit. I started on the 830-point breadboard.
The kit includes the SG90 servo, a stepper motor and the 830-point breadboard, so the first projects stay on the breadboard.
I used the DHT11 and the 5V relay from the kit. The LCD1602 needed an extra library in the Arduino IDE, which is normal for that display.
I started with the LEDs and resistors on the breadboard. The USB cable powers the board from the computer.